3D Printing Innovation in Engineering
Selkirk College and Austin Engineering worked together to create a 3D printed model of the proposed Corra Linn dam upgrades
The Corra Linn dam is due for an upgrade.
The current Corra Linn hydroelectric dam on the Kootenay River was built in 1932. FortisBC owns, operates and maintains the dam. They are replacing fourteen spillway gates, and are reinforcing the existing structure. The project is expected to be completed by 2021 with a total cost of $63 million.
To showcase the scope of the project, it is important to note that the dam does not only concern Fortis’s electric generation.
“In addition to power generation, the Corra Linn dam plays a critical role in controlling the reservoir levels in Kootenay Lake, which protects people, habitat, and communities downstream from floods,” said Tanya Laing-Gahr, Corporate Communications Advisor at FortisBC. The new gates will meet new seismic criteria as well. “By investing in upgrades, FortisBC can make sure legacy infrastructure like the Corra Linn dam continue to operate safely, reliably, and at the lowest reasonable cost to our customers for years to come.”
Creating a 3D printed model of Corra Linn
Austin Engineering Ltd. (AEL) has worked with FortisBC in the Kootenays in the past.
“We had been experimenting with 3D printed modelling,” said Mary Austin, Director of Business Development at Austin Engineering. It started with the City of Cranbrook’s Idlewood dam in 2016. AEL was contracted for the dam. 3D modelling was not in the scope of the work for that project, but they decided to test its uses.
Over the course of the project, AEL learned what a valuable tool 3D printed models were.
“We were able to save quite a lot of money because we were able to test multiple designs,” said Austin. Saving money also saved time because they were able to engage with their clients at the design stage.
“We knew something was working, so we wanted to improve the quality of the printing,” Austin said. AEL approached Selkirk College’s applied research school, specifically the digital fabrication program. AEL already worked with engineering co-op students in the past. Seeing the benefits for 3D printed models in engineering, they hired Ben Marken as their first co-op student from the digital fabrication program.
FortisBC was eager to work with both AEL and Selkirk College to create a 3D printed model of their upgraded dam design.
“We have a very special relationship with Selkirk College,” said Laing-Gahr. Almost half of their Kootenay-based employees attended the college. “We have spent many years nurturing the relationship as part of our focus on strong community connections in the places we operate.”
Benefits of 3D modelling
FortisBC wanted to upgrade the gates, but also wanted a tool for stakeholder engagement that they could bring into the community to help the community understand the dam.
“This tool provides us with real-time modelling of the Corra Linn dam against numerous factors, which is a powerful tool in portraying project concepts and details to diverse audiences,” said Laing-Gahr.
The audience includes FortisBC staff, contractors working on the project, regulators and those providing permits, community members, and stakeholders.
“It’s a valuable tool to cost effectively and quickly answer questions about these structures,” Austin said. Whether those questions concerned project planning, stakeholder engagement, long term planning, or operational costs. “There were traditional methods to getting to some of these answers, but they were prohibitively expensive.”
Traditional methods also required much more time, while AEL completed the model a few weeks ago. “Everyone was impressed by the final product.”
Commencing phase two
“The spillway gates are required to comply with new seismic criteria established by industry standards, guidelines, and regulation,” said Laing-Gahr. The dam structure is already prepared to withstand a maximum occurrence, but the gates a serious occurrence. “Upgrading to these new standards will make sure the spillway gates still operate following the occurrence of the maximum earthquake this area could experience.”
Phase Two of the project will address these seismic requirements. With the help of UBC Okanagan’s Structural Engineering department, FortisBC and AEL will test and analyze their 3D models with a water pump on a seismic shake table.
“It’s very practical research that has real effects for everyone involved,” said Austin. “It’s very exciting. We are at the preliminary stages at this point, but going forward, this is something that dam owners are looking at throughout North America.”
Clean Energy BC Operational Excellence Award
Selkirk College and Austin Engineering won the Clean Energy BC ‘Operational Excellence’ award that was presented at the Clean Energy BC Generate 2017 Conference in Vancouver on November 27.
“When we started this project, we had no idea it would be so successful, let alone recognized,” said Austin. “We really appreciate it, and it’s a great recognition for the work that Selkirk is doing at their digital fabrication program. I think it will add a lot of momentum to the second phase of the project.”
FortisBC, Austin Engineering, and Selkirk College are excited about the attention the award brings to the practical uses of 3D printed modelling in engineering. FortisBC is especially excited about the innovation the project represents.
“This represents our focus on collaborating with educational institutions like Selkirk College in a way that fosters strong regional relationships, encourages innovation, and helps develop future FortisBC employees who demonstrate progressive, out-of-the-box thinking,” said Laing-Gahr.
As FortisBC, Selkirk College, and Austin Engineering continue to showcase the benefits of 3D printed modelling, other companies watch on. Stay tuned to see the results of Phase Two’s seismic testing.